Portacool portable evaporative coolers are known as some of the best evaporative coolers in the world. So, how do they work to provide cooling? Here’s an overview
Before we discuss how an evaporative cooling system works, let’s point out the components in a Portacool evaporative cooler:
The set-up process:
When you receive your Portacool portable evaporative cooler it is ready to use right out of the box. Once unboxed all you need to do is fill the reservoir with water either directly or by connecting a garden hose to the connection. If using a hose, all Portacool evaporative coolers have an internal float that will self-regulate the water level inside the product. If using the manual fill option, all Portacool coolers are equipped with a low water shutoff mechanism that will automatically turn the pump off if the product runs out of water to protect the pump from failure. Also, a red light on the control panel will illuminate to indicate the product is out of water.
Once the water reservoir is full, flip on the switch that says “pump.” You should hear the pump quietly humming and see water running over the evaporative media in the back. If you do not see water flowing, try turning the water adjustment valve on the side of the product until it is flowing freely. The pump is important as it brings water from the reservoir through a distribution pipe and across the evaporative media. This is key to the process of evaporating the water off a surface to create cool air. (We suggest allowing the media to get completely wet, or fully saturated, before turning on the fan switch on.)
Once the evaporative media is fully saturated, turn on the fan to your desired speed. The fan will pull hot air through the water-soaked evaporative media where the water evaporates, actually cooling the air. The fan pushes the cooled air into a warm environment.
Unlike air conditioners, portable evaporative cooling systems do not need chemicals, coils, or lots of electricity to cool warm air. They only require tap water and use a small electrical draw. As evaporative cooling technology continues to improve, evaporative coolers are becoming more and more useful across the world – even in humid climates, where just a few decades ago they would have been inefficient.
Portacool products have been manufactured proudly in Center, Texas, for almost 30 years. They are exclusively made in the USA with domestic and global parts. They can be configured to any plug or electrical configuration and come fully assembled, ready to use right out of the box.
See more details on how Portacool evaporative coolers work.
©2020 Portacool Evaporative Coolers711 FM 2468, Center, TX 75935