Find A Store

Quick Start Guide - Jetstream Series

Get Your Portacool Up and Running in No Time with These Simple Setup Steps
Jetstream Series 2017 - 2022
Applies to SKUs: PACJS220, PACJS230, PACJS240, PACJS250, PACJS260 and PACJS270.

*Maximum water pressure 50 psi/345 kPa.

1 Remove Your Product from the Packaging Remove Your Product from the Packaging
2 Position Your Portacool on a Level Surface Position Your Portacool on a Level Surface
3 Fill the Tank or Attach a Water Hose Fill the Tank or Attach a Water Hose
4 Plug Into Appropriate Outlet Plug Into Appropriate Outlet
5 Fill the Tank, Turn on the Pump, Then Start the Fan For setup, the HydroTek™ media should appear wet before starting the fan. Check the water gauge to monitor water level in tank. The water adjustment valve on each portable evaporative cooler is set at max flow. However, ensure the knob is turned completely to the right before use. Turn to the left to increase water flow. If entrainment occurs (water is spitting from the front of the product) use the valve to decrease the water flow until entrainment ceases.
6 Ensure Proper Airflow for Optimal Performance Your Portacool portable evaporative cooler can be used in an open-air environment, such as a patios or outdoor jobsites. It can also be used in a semi-closed environment—such as a garage, warehouse, or factory—but you must provide adequate ambient airflow to ensure your evaporative cooler works at its highest efficiency. When using it in a semi-closed environment, be sure to leave a door or window open to allow for proper airflow.
Jetstream Series 2016

1 Remove Your Product from the Packaging Remove Your Product from the Packaging
2 Position Your Portacool on a Level Surface Position Your Portacool on a Level Surface
3 Fill the Tank or Attach a Water Hose Fill the Tank or Attach a Water Hose
4 Plug Into Appropriate Outlet Plug Into Appropriate Outlet
5 Fill the Tank, Turn on the Pump, Then Start the Fan Fill the Tank, Turn on the Pump, Then Start the Fan For setup, the HydroTek™ media should appear wet before starting the fan. Check the water gauge to monitor water level in tank. The water adjustment valve on each portable evaporative cooler is set at max flow. However, ensure the knob is turned completely to the right before use. Turn to the left to increase water flow. If entrainment occurs (water is spitting from the front of the product) use the valve to decrease the water flow until entrainment ceases.
Jetstream Series 2015
1 Remove Your Product from the Packaging Remove Your Product from the Packaging
2 Position Your Portacool on a Level Surface Position Your Portacool on a Level Surface
3 Fill the Tank or Attach a Water Hose Fill the Tank or Attach a Water Hose
4 Plug Into Appropriate Outlet Plug Into Appropriate Outlet
5 Fill the Tank, Turn on the Pump, Then Start the Fan Fill the Tank, Turn on the Pump, Then Start the Fan For setup, the HydroTek™ media should appear wet before starting the fan. Check the water gauge to monitor water level in tank. The water adjustment valve on each portable evaporative cooler is set at max flow. However, ensure the knob is turned completely to the right before use. Turn to the left to increase water flow. If entrainment occurs (water is spitting from the front of the product) use the valve to decrease the water flow until entrainment ceases.
Not for Use By:

  1. Children
  2. Persons with reduced physical, sensory, or mental capabilities
  3. Persons who have not reviewed the owner’s manual and know how to operate the product

To Reduce the Risk of Electric Shock, Fire, or Injury:

  • Do not operate your Portacool if the power cord or plug is damaged.
  • Avoid running the power cord under carpeting, rugs, or any floor coverings.
  • Keep the power cord away from high-traffic areas to prevent tripping hazards.
  • Carefully read the owner’s manual, instructions, and labels before use.
  • Always unplug your Portacool before performing maintenance, inspections, or repairs.
  • Do not step on or place heavy or sharp objects on the power cord.
  • Ensure your HydroTek™ media is securely in place before operating.
  • Test the GFCI receptacle or breaker monthly to verify proper function.
  • When unplugging, pull the plug, not the power cord, to prevent damage.
  • Do not operate your Portacool near open flames or sparks.
  • If using near an open flame or sparks, make sure the pump is running to saturate the evaporative media.
  • When cleaning the unit, prevent water from entering the motor or electrical components.

Important Notices:
The use of extension cords with your evaporative cooler is not recommended. However, if the owner determines that the circumstance for intended use require an extension cord, the extension cord:

  • Must be 14 gauge or greater
  • Must not exceed 50 (15.24 meters) feet in length
  • Must be properly grounded

Do not modify your evaporative cooler in any way, except for repairs performed by qualified individuals using genuine Portacool replacement parts.

  • If your evaporative cooler is damaged or malfunctioning, discontinue use immediately. Refer to the Warranty or FAQ pages for troubleshooting guidance.
  • For assistance, contact Portacool Customer Service at (936) 598-5651 or (800) 695-2942, or via email at support@portacool.com.